SOLENOID PILOTS PS1 (HD REGULATOR) (0-180 PSI)

SOLENOID PILOTS PS1 (HD REGULATOR)   (0-180 PSI) 

The Solenoid Pilot can be used for automatic operation, remote control, programmed cycling, sequential function interlocks with other equipment, and emergency shut-off in case of power failure.

The Solenoid Pilot can be used in conjunction with Pressure, Temperature, or Air Pilots to electrically control on/off operation of the HD Regulator. When the solenoid pilot is used, the regulator can be turned on or off by electrically activating or de-activating the solenoid.

Normally Closed (nc) – Standard
The normally closed Solenoid Pilot remains closed in the non-activated state. The regulating valve will remain closed until an electrical signal is sent to the solenoid pilot. This is known as a fail-safe condition.

Normally Open (no) – Optional
The normally opened Solenoid Pilot remains open in the non-activated state. The regulating valve will function normally unless an electrical signal is used to shut-off the solenoid pilot.

Model: Solenoid Pilot
Body & Cover Material: Ductile Iron
Max Inlet Pressure:  250 PSIG
Steam Inlet Pressure: 0-180 or 180-250 PSIG
NEMA Ratings:
  NEMA 1 – Standard
  NEMA 4 – Waterproof (Optional)
  NEMA 7 – Explosion-proof (Optional)
Voltage:
  110 VAC (Standard)
  24 VAC (Optional)
  220 VAC (Optional)
  240 VAC (Optional)

Click here for more product details